Loading ...
Loading ...
Loading ...
DUAL PICKPOINT OPERATION
With “Dual pickpoint operation” the vertical
aiming of the array is set by trimming
the hoist motors after the array has been
fully assembled and lifted to its operating
position.
PRESET OF SPLAY ANGLES
1. Remove all the rear locking pins of the
cabinets turning the rear bracket into the
upper module and inserting the pins in the
proper position.
2. Preset the splay angles of all cabinets,
based on RCF Easy Shape Designer software
Hook the flybar to the chain and lift the
flybar to a suitable height for the first
cabinet.
SINGLE PICKPOINT OPERATION
(suggested for 8 modules maximum)
Fit the pickup in the proper position number,
(suggested by RCF Easy Shape Designer),
and fix the pickup bracket with the two
pins. The position of the pickup defines the
vertical aiming of the entire array.
Check that all the pins are secured and
locked
Loading ...
Loading ...
Loading ...