Loading ...
Loading ...
Page 3L117 0311A
Installation Details
1) Read all instructions thoroughly before beginning installation.
2) When installing the KHSLD wall mount liner, it is recommended that the bottom edge of the liner be located no more
than 21”- 24” from the cooking surface. Exceeding recommended mounting height may compromise performance.
3) Determine whether the liner will discharge horizontally or vertically. The liner is shipped to discharge vertically but is
easily converted to horizontal discharge by exchanging the discharge adapter on top of the liner (4 screws) with the
discharge cover on the back of the liner (2 screws). Use duct tape to seal the discharge adapter and the discharge
cover to the liner.
4) IF THE LINER IS TO BE “BACK VENTED”, PROCEED DIRECTLY TO STEP 5.
Install the duct from the outside of the home down to the location of the exhaust outlet on the top of the liner allowing
room for the VP521 transition (if applicable). If a VP521 transition is used, install the duct down to the location of the
transition outlet plus 1”. This will allow the transition to engage 1” inside of the duct. Consult the connection diagram
(below) for further details on exhaust outlet placement.
Use duct tape to seal all joints. A complete listing of available Vent-A-Hood ducting materials is provided on the back
page of this instruction sheet.
Transition height: 3 1/4” x 10” duct will connect directly to the exhaust outlet of the hood. Optional VP521 transition
to 7” round (sold separately) is 7 1/2” tall.
5) Remove the liner from the packaging and place underneath the enclosure (previously installed).
Loading ...
Loading ...