Instruction Manual
Item: 12085
Model: 32510360
16 Inch
Digital Stand Fan
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
OPERATIONS /CLEANING /
MAINTENANCE
FCC STATEMENT /
WARRANTY INFORMATION
©2023 Sunbeam Products, Inc. All rights reserved.
HOLMES
®
is a registered trademark of Sunbeam Products, Inc. used under license.
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
SEH022-033023
Printed In China
3 YEAR LIMITED WARRANTY
This device has a limited warranty of 3 years from the original date of purchase against workmanship and defects in
material. If under normal use, your product fails to operate, please contact our customer service department at
info@getholmesfans.com. A refund or replacement will be provided to you with proof of purchase. Star Elite Inc. may
deny claims of damage caused by misuse or modications of this product.
Warranty Service
Contact our customer service at www.getholmesfans.com/en/contact-us
or info@getholmesfans.com or 1-866-769-3166 (8:30 am - 5:00 pm EST) Monday-Friday.
Our team will be happy to assist.
www.getholmesfans.com
FCC STATEMENT
Potential for Radio/Television interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If the product does cause harmful interference to radio or
television reception, which can be determined by turning the product on or off, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
The following importer is the responsible party:
Company Name: SEG Products US Corp.
Address: 8 The Green, Suite #6962, Dover, DE 19901
Telephone: 1-959-202-4223
FAN CLEANING
• Always unplug the fan before cleaning.
• Do not allow water to drip on or into fan housing.
• Use only a soft cloth moistened with a mild soap
solution.
• Do not use harsh chemicals such as gasoline, thinner
or benzene as a cleaner.
FAN BLADE CLEANING
1. Remove the front grill by opening the clips located
around the perimeter.
2. Clean the fan blade, front and rear grills with a soft
cloth moistened with a mild soap solution.
3. Securely fasten the front grill to the rear grill by
closing the clips around the perimeter.
FAN HEAD, BASE AND POLE CLEANING
Using a soft, moist cloth (with or without a mild soap
solution), carefully clean the fan base, pole and head.
Use CAUTION around the housing area. Do not allow the
motor or other electrical components to be exposed to
water.
FAN STORAGE
This fan can be stored either partially disassembled or
assembled.
• Store the fan in a clean, dry location between
seasons or when not in use for an extended period
of time.
• Keep the fan protected from dirt and dust during
storage.
NOTE: This fan can also be used during the cold winter
season to circulate warm air throughout your home.
For inquiries regarding recycling and proper
disposal of this product, please contact your local
waste management facility.
USER SERVICING INSTRUCTIONS
Follow these instructions to safely and correctly care for
this fan.
REPLACEABLE FUSE
If the (5 Amp, 125 Volt) replaceable fuse blows, please
visit our website at www.getholmesfans.com
for information on how to order a new fuse. Follow the
below instructions to replace the fuse on the plug.
REPLACING THE FUSE
1. Unplug the fan.
Grasp plug and remove from the receptacle or other
outlet device.
NOTE: Do not unplug by pulling on cord.
2. Open fuse cover, located on the top of the plug, by
using your thumb or a athead screwdriver to slide
the cover towards the prongs.
NOTE: Ensure the fuse
cover is completely open
before attempting to
remove fuse.
3. Remove fuse carefully by
using a small screwdriver
to pry it from the
compartment at the metal
ends of the fuse. (See Figure 4)
4. Place plug on a solid, at surface. Insert new 5 Amp,
125 Volt fuse into fuse compartment. Use a small
screwdriver to secure the metal ends of the fuse into
the compartment.
CAUTION: Risk of re. Replace fuse only with 5 Amp,
125 Volt fuse.
5. Slide fuse cover closed completely.
NOTE: If fuse cover is difcult to close, make sure
the fuse is completely secured in place by pressing
on metal ends of the fuse.
CAUTION: Risk of re. Do not replace the
attachment plug. It contains a safety device (fuse)
that should not be removed. Discard product if the
attachment plug is damaged.
Figure 4
Fuse
Fuse cover
Metal ends
Loading ...
Loading ...
Loading ...
