Loading ...
Loading ...
Loading ...
14
Operation (continued)
Cooking
Set Cooking Time using the
Number pads. P10 (HIGH)
has max. cooking time of
30minutes. For other power
levels, the max. time is
99minutes, 99seconds.
If cooking at high power (10),
skip to step 2. Press Power Level
until the desired power level
appears in the display. P10 is the
highest and P1 is the lowest.
2
Press Power Level
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
P10 (HIGH)
P9
P8
P7 (MED-HIGH)
P6 (MEDIUM)
P5
P4
P3 (MED-LOW)/
DEFROST
P2
P1 (LOW)
1
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. For reheating, use P10 (HIGH)
for liquids, P7 (MED-HIGH) for
most foods, and P6 (MEDIUM)
for dense foods.
2. For defrosting, use P3
(MED-LOW).
DO NOT OVERCOOK: This
oven requires less time to cook
than older units. Overcooking
will cause food to dry out and
may cause a fire. A microwave
oven’s cooking power tells
you the amount of microwave
power available for cooking.
Stage Cooking:
For more than one stage of
cooking, repeat steps 1 and
2 for each stage of cooking
before pressing Start. The
maximum number of stages
for cooking is three. When
operating, two beeps will
sound between each stage.
Five beeps will sound at the
end of the entire sequence.
Automatic function (such as
sensor cook/reheat, popcorn
and inverter turbo defrost)
can not be used with 3 stage
cooking.
3
Setting the Timer
Set desired amount of time
using Number pads (up to
99minutes, 99seconds).
Press Start. The timer will count
down without cooking and beep
five times when done.
Caution: If oven lamp is lit
while using the timer feature
with door closed, the oven is
NOT set properly; STOP OVEN
IMMEDIATELY and re-read
instructions.
2
3
1
This feature allows you to
program the oven as a kitchen
timer. Press Timer once.
Quick 30
(Set or add cooking time in
30 seconds increments)
Press Quick 30 until the
desired cooking time (up to
5 minutes) appears in the
display. Power Level is pre-set
at P10.
2
1
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. If desired, you can use
other power levels. Select
desired power level before
pressing Quick 30.
2. After setting the time by
Quick 30 pad, you cannot
use the Number Pads.
3. Quick 30 pad can also be
used to add more time
during manual cooking (up
to 5 minutes) .
F0003BX00CP.indd 14 2017/5/5 10:57:10
Loading ...
Loading ...
Loading ...