Loading ...
Loading ...
Loading ...
EVID
TM
Owner’s Manual
4
Figure 4: Rotation Range (90°)
Product Description
SAM™ (Strong-Arm-
Mount™) System
EVID™’s SAM™ system (Strong-Arm-
Mount™) excels at meeting the four
requirements for mounting FGM/BGM
systems: simple, quick, versatile, and
reliable. Three easy steps and you are
done: Attach the surface bracket to the
wall or ceiling; attach the EVID™
enclosure to the bracket with the socket-
head bolt; aim the enclosure and tighten
the bolt. SAM™ allows greater flexibility
for aiming than ball-type mounts that limit
range of motion when not on center.
Typical ball designs have limited rotation
when pointing straight ahead, and even
that is reduced when the enclosure
contacts the wall and is moved off axis. By
contrast, SAM™ allows full rotation even
at full sweep. Figure 4 shows SAM™’s
range of rotation (note that EVID™’s
curved cabinet allows it to rotate much
further [90°] than a rectangular or
trapezoidal box). Figure 5 shows the range
of sweep motion left and right on the wall.
All three models allow 100° of sidewise
motion.
Step-by-Step Installation
and Wiring (3.2, 4.2, 6.2)
Step 1: Mount the SAM™ Bracket
to the Wall
The SAM™ bracket can be mounted on
either side of the speaker, enabling
optimal configuration for any installation.
Determine whether the bracket should be
mounted on the left or right side of the
speaker before you bolt the speaker to
the bracket. It is best to mount the bracket
on the side away from the direction in
which the speaker will be aimed. This
ensures that the full swing angle is
available for aiming on that side and
provides easier access to the swing
tightening bolt on the wall bracket (see
Fig. 10, Step 3). For safety, make sure the
mounting surface can support more than
the speaker's weight! Use only industry-
accepted fasteners and mounting
methods when mounting the bracket.
Consult an expert if you are not sure.
Read steps 2 and 3 before wiring the
speaker in step 4.
For standard vertical installation mount the
SAM™ bracket as shown in Figure 6. For
horizontal mounting configurations,
mounting the bracket on the bottom side
(as in Figure 7) is easiest and safest, and
allows the speaker to be mounted closer
to the ceiling.
Figure 6: SAM
TM
Mounted on Side
Figure 5: Sweep Range (100°) Figure 7: SAM
TM
Mounted on Bottom
9
0˚
100˚
SAM™
SAM™
C
eiling
Loading ...
Loading ...
Loading ...