Ancona AN-1163 User Manual & Installation Instructions

Loading ...

— 13 —

Installation

STEP 13

Install Upper Chimney

• Remove the protective lm from the upper chimney.

Carefully slide the upper chimney inside the lower

chimney.

• Extend the telescopic upper chimney until it reaches

the upper chimney bracket and attach the upper

chimney to the bracket using the provided screws.

• Peel off protective lm from the rest of the range hood.

STEP 14

Install Filters

•

Place two rubber pads on opposite side of each

filter handle.

Align the upper chimney

bracket with the range hood

below.

•

Holdthebafflefilterbytheknob.

• Placethefrontofthebafeagainsttheinteriorfront

of the range hood.

• Slide it up and push the rear of the lter back until it

sits securely.

•

Thebafflefilterschannelgreasereleasedbycooking

andpreventflamingfoods on the cooktop from

damaging the inside of the rangehood.Forthis

reason,thebafflefiltersmust ALWAYS be installed

during range hood use.

•

Thebafflefiltersshouldbecleaned once a month, or

as needed. See page 15 for cleaning instructions.

Loading ...

Ancona WPE636 Elite Range Hood An-1163