Loading ...
Loading ...
Loading ...
Troubleshooting en
43
Fault Cause and troubleshooting
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
▶ Ensure that the water drain hose is connected cor-
rectly.
→"Connecting the water drain hose", Page14
The programme does
not start.
Childproof lock is activated.
▶
→"Deactivating the childproof lock", Page35
You have not pressed Start/Pause .
▶ Press Start/Pause .
No programme set.
1.
→"Setting a programme", Page30.
2.
→"Starting the programme", Page30.
The length of the pro-
gramme changes dur-
ing the drying cycle.
The programme operation is optimised electronically.
This may change the programme duration.
▶ Not a fault – no action required.
Pumping noise. Condensation pump active.
▶ Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶ Not a fault – normal operating noise.
The drying time is too
long.
The base unit's filter is soiled.
▶
→"Cleaning the filter system on the base unit",
Page33
Fluff filter is soiled.
▶
→"Cleaning the fluff filter", Page31
The ambient temperature is greater than 30 °C.
▶ Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶ Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶ Ventilate the appliance's installation location.
The appliance's ventilation opening is blocked.
▶ Ensure that the ventilation opening of the appliance
is kept clear.
Heat exchanger is soiled.
1. Opening the base unit.
→"Opening the base unit", Page37.
Loading ...
Loading ...
Loading ...