Loading ...
Loading ...
Loading ...
www.mxlmics.com www.mxlmics.com4 5
Connecting the Microphone to Your Computer
(Windows)
The MXL Tempo USB microphone will operate with both
USB 2.0 (high speed USB) and USB 1.1 data buses. We
recommend you connect your microphone directly to
the computer’s USB port as opposed to using a USB
hub. USB hubs have been known to interfere with the
performance of various USB devices.
PLEASE NOTE: Audio and video recording can be very
taxing to a computer’s resources. For this reason, you
should close any and all running applications that are not
essential.
Please take the following steps to get connected:
1. If open, close your audio recording application. You
will open it after the microphone is connected and
operational.
2. Connect the remaining end of the USB cable to the
computer’s USB port. You will see a red LED illuminate
on the back of the microphone located next to the
headphone jack, and Windows will display the New
Hardware Found dialog message.
3. Allow Windows time to identify the device.
4. In approximately one minute, Windows should display
a dialog message stating that Your New Hardware is
Installed and Ready for Use. After this first connection,
Windows will require just a few moments to identify the
microphone.
of the cable will connect to your computer’s USB
port
.
Initial Setup with Windows XP Operating System
1. To select the MXL Tempo USB microphone as the
default audio device, go to the Start Menu and select
Control Panel.
2. Select Sounds and Audio Devices.
3. Click on the Audio tab and select USB audio CODEC
as the default device for Sound playback and Sound
Recording.
Loading ...
Loading ...
Loading ...