Loading ...
Loading ...
Loading ...
15
ENG
TROUBLESHOOTING TIPS
Before Calling for Service
Reviewing the charts on the following pages may save you from calling for service.
Problem Possible Causes What to Do
Dishwasher doesn’t
start
Fuse blown, or the circuit break tripped. Replace fuse or reset circuit breaker.
Remove any other appliances sharing the
same circuit with the dishwasher.
Power supply is not turned on. Make sure the dishwasher is turned on and
the door is closed securely. Make sure the
power cord is properly plugged into the
wall socket.
Water pressure is low Check that the water supply is connected
properly and the water is turned on.
Door of dishwasher not properly closed. Make sure to close the door properly and
latch it.
Water not pumped
form dishwasher
Twisted or trapped drain hose. Check the drain hose.
Filter clogged. Check the filter system.
Kitchen sink clogged. Check the kitchen sink to make sure it is
draining well. If the problem is the kitchen
sink that is not draining, you may need
a plumber rather than a serviceman for
dishwashers.
Foam in the tub Wrong detergent. Use only the special dishwasher detergent
to avoid suds. If this occurs, open the
dishwasher and let suds evaporate. Add
4 liters of cold water to the bottom of the
dishwasher.
Close the dishwasher door, then select any
cycle. Initially, the dishwasher will drain out
the water. Open the door after draining
stage is complete and check if the suds
have disappeared. Repeat if necessary.
Spilled rinse aid. Always wipe up rinse aid spills immediately.
Stained tub interior Detergent with colorant may have been
used.
Make sure that the detergent has no
colorant.
White film on inside
surface
Hard water minerals. To clean the interior, use the damp soft
cloth with dishwasher detergent and wear
rubber gloves. Never use any other cleaner
than dishwasher detergent otherwise, it
may cause foaming or suds.
There are rust stains
on cutlery
The affected items are not corrosion
resistant.
Avoid washing items that are not corrosion
resistant in the dishwasher.
A program was not run after dishwasher
salt was added. Traces of salt have gotten
into the wash cycle.
Always run a wash program without any
crockery after adding salt. Do not select the
Turbo function (if present).
The lid of the softer is loose. Check the softener lid is secure.
Loading ...
Loading ...
Loading ...