Loading ...
Loading ...
Loading ...
4. Press (C).
5. Use (D) to change the summer time
setting.
●
[OFF
]
The watch always indicates standard
time.
●
[ON
]
The watch always indicates summer
time.
6. Press (A) to complete the setting
operation.
Note
●
While the setting is being configured,
the watch
will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
Setting the Time/Date
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when [SET]
starts to
flash.
3. Use (C) to display the setting you want to
change.
●
Each press of (C) cycles through
settings in the sequence shown below.
Summer time
Home City
Minutes
Hours
Seconds
Day
Month
Ye a r
12/24-hour timekeeping
Operation tone enable/disable
Illumination duration
4. Configure the date and time settings.
●
While the seconds are flashing,
pressing (D) will reset them to 00. 1 is
added to the minutes when the current
seconds count is between 30 and 59
seconds.
●
For all the other settings, use (B) and (D)
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
5. Repeat steps 3 and 4 to select time and
date settings.
6. Press (A) to complete the setting
operation.
Note
●
While the setting is being configured,
the watch
will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 5553
9
Loading ...
Loading ...
Loading ...