Ryobi RY401140 40V HP Brushless 21 in. Cordless Battery Walk Behind Self-Propelled Lawn Mower with 2 6.0 Ah Batteries and Charger

Use and Care Manual - Page 17

For RY401140.

PDF File Manual, 44 pages, Read Online | Download pdf file

RY401140 photo
Loading ...
Loading ...
Loading ...
13 — English
TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM POSSIBLE CAUSE SOLUTION
Handle not in position. Handle adjustment knobs and/or handle
lock levers are not secured.
Make sure handle adjustment knobs
are fully seated and handle lock clips
are fully locked.
Mower not starting. Battery is low in charge.
Start key not installed.
Handle assembly is not in operating
position.
Charge the battery.
Install start key.
Raise lower and upper handle.
Mower cutting grass unevenly. Lawn is rough or cutting height not set
properly.
Adjust the cutting height.
Mower not mulching properly. Wet grass clippings sticking to the un-
derside of the deck.
Wait until the grass dries before mowing.
Mower hard to push. High grass, rear of mower housing and
blade dragging in heavy grass, or cut-
ting height too low.
Raise cutting height.
Mower not bagging properly. Cutting height set too low.
Grass blocking rear chute of mower.
Raise cutting height.
Stop the motor, remove start key, and
battery. Remove grass catcher bag and
remove the blockage.
Mower vibrating at higher speed. Blade is unbalanced, excessively or
unevenly worn.
Bent motor shaft.
Replace the blade.
Stop the motor, remove start key, and
battery. Inspect for damage. Have re-
paired by an authorized service center
before restarting.
Motor stops while cutting. Cutting height set too low. Raise the cutting height.
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-525-2579.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
1-800-525-2579
Loading ...
Loading ...
Loading ...