Loading ...
Loading ...
Loading ...
$11 Pd 1/6
P0115 Generic
Engine Coolant Temperature
Sensor 1 Circuit
The control module number, sequence of the DTCs, total
number of codes detected and type of codes (Generic o
r
M
anufacturer specific, Stored or Pending codes) will be
observed on the upper right hand corner of the display.
3) I
f more than one DTC is found, use UP/DOWN butt
on,
a
s necessary, until all the codes have been shown up.
I
f no codes are detected, a “No codes are stored in the
module!” message displays on the screen.
If retrieved DTCs contain any manufacturer specific or
enhanced codes, the display indicates “Manufacturer
control”.
$09 4/6
P1324 Other
Manufacturer control
4) Press EXIT button to return to previous menu.
4.2 Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the
code reader to delete not only the codes from the vehicle’s on-board
computer, but also “Freeze Frame” data and manufacturer enhanced
data. Further, the I/M Readiness Monitor Status for all vehicle
monitors is reset to Not Ready or Not Complete status. Do not erase
the codes before the system has been checked completely by a
technician.
This function is performed with key on engine off (KOEO). Do
16
Loading ...
Loading ...
Loading ...