Loading ...
Loading ...
Loading ...
10
4.2 Control panel
Set the desired temperature according to the scale between 000
(normal temperature water) and 212 °F
Switch the device ON, the lamp lights in green.
4.3 Rating plate
The rating plate with the connection and performance data can be
found beneath the device.
5 Operation and Handling
This chapter provides you with important notices with regard to operating the device. Observe the
following notices to avoid dangers and damages.
Warning
► Do not leave the appliance unsupervised during operation.
5.1 Before initial use
1. Place the device in a safe location and plug it in.
2. Please do not use the filter at this moment yet.
3. Fill the water tank with approximately 4 cups of water.
4. Remove the drip tray.
5. Place a large bowl in front of the device so that it collects the water that runs out of the spout.
6. Start the device with maximum temperature setting.
7. Switch the device off, when the lamp lights in red.
8. Remove the plug from the wall outlet and let the device cool down.
9. Refill the water tank again with fresh water. The device is now ready to use.
Filter
Warning
► The filter is only intended to filter tap water. Do not use water of unknown quality or that has
been microbiologically impaired.
1. Remove the filter from all packaging. There may be a small residue of black carbon particles in
the bag or adhering to the cartridge body. This is normal. These particles are harmless and will
be washed off during the preparation process.
2. Soak the filter upright in water for 10 min.
3. Rinse the filter under running water for 10 sec.
4. The filter is now ready for use.
Loading ...
Loading ...
Loading ...