Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
This machine is designed for cutting branches, trunks,
logs and beams of a diameter determined by the cutting
length of the guide bar. It is only designed to cut wood.
It is only to be used in an outdoor, domestic application
by adults.
Do not use the machine for any purpose not listed
above.
This machine is not to be used for professional tree
services. It is not to be used by children or by persons
not wearing adequate personal protective equipment
and clothing.
This appliance is not intended for use by persons with
reduced physical, sensory or mental capabilities or lack
of experience or knowledge, unless they have been
given supervison or instruction concerning use of the
appliance by a person responsible for their safety.
1.2 OVERVIEW
4
5
3
2
9
10
8
6
7
1
12
13
11
1
Guide bar cover
2
Front handle guard
3
Front handle
4
Lock out button
5
Trigger
6
Oil tank cap
7
Oil indicator
8
Bucking spikes
9
Chain
10
Guide bar
11
Rear handle
12
Chain cover
13
Chain tension knob
2 GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
battery-operated (cordless) power tool.
2.1 WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
2.2 ELECTRICAL SAFETY
• Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
2.3 PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a
dust mask, non-skid safety shoes, hard hat or
hearing protection used appropriately will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off position before connecting to power
source and/or battery pack and when picking up
or carrying the tool. Carrying power tools with your
finger on the switch or energizing power tools that
have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not over-reach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
4
English
EN
Loading ...
Loading ...
Loading ...