Loading ...
Loading ...
Loading ...
10
8. INSTALL THE ADAPTER AND THE TRANSITION (IF NEED BE)
(INTERNAL BLOWER HOOD ONLY)
HJ0013
Using standard 3/8" screws provided, secure
the adapter to the top (or back) of the hood
(2 screws for a 3¼" x 10" adapter/damper and
4 screws for a 4½" x 18½" adapter). Seal the
adapter to the hood using metal foil duct tape.
For round ducting, install an appropriate sized
transition and seal the joints with metal foil
duct tape.
7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) ONLY) (CONT'D)
Slide the blower to disengage its flange from the retaining bracket.
HD0270
Flip the blower and engage its flange in the back wall
retaining bracket.
Using a 5/16" socket and the screws previously
removed, secure the blower to the hood.
Plug the blower in.
NOTE FOR DUAL BLOWER HOOD ONLY: Cut off the plastic tie wrap on left motor cable.
HE0085
HD0271
LEFT SIDE
MOUNTING
SCREW
LOCATION
HD0272
RIGHT SIDE
MOUNTING
SCREW
LOCATION
Loading ...
Loading ...
Loading ...