Loading ...
Loading ...
Loading ...
What to Do?
1
Use a bucket to ush water.
2
If the water level is low after
ushing, add more water.
.srodo stneverP•
Attention!
eht fo edis pot eht no detacol si nottub "HSULF" nehw ylno( "FFO" ot "HSULF OTUA" tes ,krow gnitrats erofeB•
remote control). (Page 44)
lluf a mrofrep ot erus eb ,derotser si ylppus retaw eht nehW• ush. (To prevent waste from remaining in the drain pipe.)
■
Replacing the batteries
1
Unplug the power plug.
2
Remove the remote control from the hanger.
(Page 18)
<Power>
3
Open the battery cover and replace two AA
batteries.
(Page 18)
.ffo seog kram gninraw yrettab wol ehT•
4
Mount the remote control in the hanger.
5
Insert the power plug.
.pu sthgil DEL "rewoP" ehT•
Attention!
• "ON" and "OFF" settings of the functions such as the energy saver function may be canceled when the batteries
are replaced.
Set them again.
If the water does not ow due to a water service interruption
If you cannot operate with the remote control
■
If the low battery warning mark "
" on the
display screen on the back of the remote
control lights up, please replace the batteries.
MENU
1.MANUAL
CLEANING
1/5
Low battery
warning mark
If the water does not ow due to a water service interruption
If you cannot operate with the remote control
Newspaper, dustcloth, etc.
Large bucket
Pour strongly, aiming
at the center of the
bowl unit.
62
Freeze Damage Prevention
When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing.
Attention!
.erutaef revas ygrene eht esu ton od ,rewol ro 32 °F (0 °C) ot pord ot ylekil si erutarepmet tneibma eht nehW•
(May damage the product.)
Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 32 °F (0 °C).
•
• Before starting work, set "AUTO FLUSH" (only when "FLUSH" button is located on the top side of the remote control)
(Page 44) and "Auto open/close" (Except SW3046AT40, SW3046, SW3044AT40, SW3044) (Page 46) to "OFF".
How to freeze damage prevention
1
Close the shutoff valve.
(Page 41 Step
1
)
.spots ylppus retaw ehT•
CAUTION
Do not remove the water lter
drain valve while the shutoff
valve is open.
(Otherwise, water may leak out.)
2
Drain the water from the toilet
tank.
eht litnu .cte/nottub/revel eht etalupinaM•
water stops.
3
Press
"Wand CLEAN" button.
.revoc dnaw eht nepO•
(Release the pressure from the water
supply pipe.)
4
Unplug the power plug.
5
Drain the pipe.
①
retaw dna revoc eht evomeR
lter drain
valve.
retaw eht nesooL•
lter drain valve with
a
at-head screwdriver and then pull it.
Water Filter
Drain Valve
Flat-head screwdriver
Cover
②
Drain the water from the water supply hose.
Water supply hose
Horizontally
③
retaw eht llatsni ,retaw eht gniniard retfA
lter drain valve and cover.
retaw eht tresnI•
lter drain valve and
use a
at-head screwdriver to tighten it
securely.
6
Insert the power plug.
.pu sthgil DEL "rewoP" ehT•
7
Set the toilet seat temperature
to "High".
(Page 28)
eht esolc ,erutarepmet eht niatniam oT•
toilet seat and toilet lid after
nishing work.
■
To use the product again
)46 egaP( .deilppuser eb ot sdeen retaw ehT•
63
Reference
Loading ...
Loading ...
Loading ...