Loading ...
Loading ...
Loading ...
INSTALLATION AND USE & CARE INSTRUCTIONS
INSTALLATION
5
9. Install blower.
Re-install blower. Secure blower with (2) screws from parts bag and
plug blower into black receptacle.
5. Remove old fan.
Enlarge ceiling opening (if necessary)
to 9¾” (parallel to joist) by 10½”
(perpendicular to joist). Leave ductwork
and wiring in place.
6. Fold mounting ears flat
against housing.
RETROFIT
2
10½-in.
9¾-in.
JOIST
1
10. Finish ceiling, then install grille.
NOTE: The MOUNTING PLATE and GRILLE PAN need to be
disassembled before installing.
Attach MOUNTING PLATE to housing with (2) SCREWS, using the
GRILLE BRACKETS installed in step 4. The MOUNTING PLATE hole that
does not have a triangle next to it must be aligned with the LIGHT PLUG.
Connect LIGHT PLUG to receptacle in corner of housing.
Secure GRILLE PAN to MOUNTING PLATE USING (3) GRILLE PAN
MOUNTING SCREWS.
Line up GLASS SHADE with GRILLE PAN openings and rotate
GLASS SHADE clockwise to secure it to GRILLE PAN.
GRILLE
BRACKETS
LIGHT PLUG
MOUNTING
PLATE
(2) MOUNTING PLATE
ATTACHMENT SCREWS
LIGHT PLUG
GRILLE
PAN
(2) 25W (MAX EACH)
TYPE A19 LED BULBS
(NOT INCLUDED)
(2) MARKED
HOLES
(2) KEY SLOTS
GLASS
SHADE
(3) GRILLE PAN
MOUNTING SCREWS,
INSTALLING THE TWO
MARKED FIRST AND
LINING THEM UP WITH
THE KEY SLOTS ON
THE GRILLE PAN
Loading ...
Loading ...
Loading ...