Loading ...
Loading ...
Loading ...
Installing the Light Kit 8.
CAUTION: Before starting installation,
disconnect the power by turning off the circuit
breaker or removing the fuse at fuse box. Turning
power off using the fan switch is not sufficient to
prevent electric shock.
Step 1. Remove the 1 of 3 screws from the posts
of the switch houising and keep it for future use.
Loosen the other 2 screws. (Do not remove) (Fig.
14)
Step 2. While holding the LED light kit under
your fan, make the polarized plug connections:
- White to white
- Black to blue
Step 3. Place the key holes in the LED light kit
over the two screws previously loosened from the
switch houising. Turn the LED light kit until the
LED light kit locks in place at the narrow section
of the key holes. (Fig. 14)
Step 4. Securely tighten the two light kit
mounting screws previously loosened and the one
previously removed. (Fig. 14)
Step 5. Raise glass shade up against the LED
light kit, and secure it to fan by turning light kit
shade clockwise until snug. DO NOT
OVERTIGHTEN. (Fig. 15)
Figure 15
Figure 14
Screws
Switch housing
Wire connector
Light kit
Switch
housing
Glass
shade
Loading ...
Loading ...
Loading ...