Loading ...
Loading ...
Loading ...
LF
LF
LF
LF
I
:
LF$
Â
Ĉ
7
LF$
$
$
~
ʑ
ʑ
ʑ
a
§j
ǯa
a
>
§³Å
a
§³µa
a
§´
'
a
ª
a
a
Â
>
Â
>
$
Â
12
What to do if
ʑ
Water is running out. Correctly attach/replace drainage hose.
Tighten screw-fitting on the supply hose.
ʑ
Water not flowing in.
Detergent not washed in.
$Start/Reload not selected?
Tap not open?
Filter blocked? Cleaning the filter
aPage 11
Supply hose kinked or jammed?
ʑ
Washing-machine door
cannot be opened.
Safety function active. Stop programme? aPage 4
- - - - (Rinse hold = without final spin) selected? aPage 3, 4
Can be opened via emergency release only? aPage 13
ʑ
Programme does not
start.
$Start/Reload or Ready in time selected?
Door closed?
ʑ
Detergent solution is not
drained.
- - - - (Rinse hold = without final spin) selected? aPage 3,4
Clean detergent-solution pump. a Page 11
Clean outlet pipe and/or drainage hose.
ʑ
Water not visible in the
drum.
Not a fault water below the visible area.
ʑ
Spin result not
satisfactory,
washing wet/too damp:
Not a fault unbalanced load detection system has stopped the
spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
Too low speed selected? aPage 5
ʑ
The programme duration
changes during the wash
cycle.
Not a fault the programme sequence is optimised for the
particular wash process. This may result in changes to the
programme duration in the display field.
ʑ
Spin cycle actuated
several times.
Not a fault unbalanced load detection system adjusts
imbalance.
ʑ
Residual water in the
dispenser for care
product 0.
Not a fault effect of the care product not impaired.
If required, clean insert. aPage 10
ʑ
Odour formation in the
washing machine.
Run LFCottons 90 °C programme without washing.
Use standard detergent.
ʑ
Status symbol ª flashes.
Foam may be coming out
of the detergent drawer.
Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and
pour into dispenser II.
(Not for outdoor, sports and down-filled textiles!)
Reduce detergent dosage for the next wash cycle.
ʑ
Loud noise formation,
vibrations and Wander-
ing during spin cycle.
Appliance feet fixed?
Secure appliance feet. aInstallation Instructions
Transportation protection devices removed?
Remove transportation protection devices.
aInstallation Instructions.
ʑ
Display panel/indicator
lights do not function
while the appliance is
running.
Power failure?
Fuse tripped? Switch on/replace fuse.
If the fault occurs repeatedly, call customer service.
ʑ
The programme takes
longer than usual.
Not a fault unbalanced load detection system adjusts
imbalance by repeatedly distributing the washing.
Not a fault foam detection system active a rinse cycle
is switched on.
13
What to do if
ʑ
Detergent residue on the
washing.
Occasionally phosphate-free detergents contain water-insoluble
residue.
Select SuperQuick 15' or brush the laundry after washing.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
Set programme selector to  Off and pull out the mains plug.
Turn off the tap and call customer service.
aInstallation instructions
Emergency release e.g. if power failure occurs
The programme continues running when the power supply is restored. If the washing is still
to be removed, the door can be opened as described below:
Risk of scalding!
Wash liquor and washing may be hot. If required, leave to cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
1. Set programme selector to
ÂOff, pull out the mains plug.
2. Drain detergent solution. aPage 11
3. Take the emergency release out of the holder.
Pull down emergency release with a tool and release.
Door can then be opened.
Customer service
ʑ
If you cannot rectify the fault yourself (What to do if ... , aPage 12, 13), please contact our
customer service. We will always finds a suitable solution to avoid unnecessary visits by
technicians.
ʑ
You can find the contact data for your nearest customer service here or in the customer
service list (depending on model).
ʑ
Please give customer service the product number (E-Nr.) and the production number (FD)
of the appliance.
Product number Production number
These instructions can be found on: inside of
washing machine door */open service flap *
and rear of the appliance.
* depending on model
ʑ
Rely on the competence of the manufacturer. Contact us.
You can therefore be sure that the repair is carried out by trained service technicians who
carry original spare parts.