Loading ...
Loading ...
Loading ...
7
Installation Instructions
1
Make sure that the power to the source and other equipment being
connected is turned off.
2
Connect the VGA and audio* source to the INPUT port(s) on the
transmitter unit using a VGA and audio* cable.
3
(Optional) – Connect a local monitor and speakers* to the OUTPUT 1
and OUTPUT 2 ports on the transmitter unit using VGA and audio*
cables.
4
Connect the external power supply to the transmitter unit, and then
plug it into a Tripp Lite Surge Protector, Power Distribution Unit (PDU)
or Uninterruptible Power Supply (UPS).
5
Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the
transmitter unit to the RJ45 INPUT port on the receiver unit.
6
Connect a monitor and speakers* to the OUTPUT 1 and OUTPUT 2
ports on the receiver unit using VGA and audio* cables.
7
Connect the external power supply to the receiver unit, and then plug
it into a Tripp Lite Surge Protector, PDU or UPS.
8
Turn on the power to the source and connected equipment.
9
If necessary, adjust the Equalization setting using the included
screwdriver to improve the video image.
* If using the B130-202A
14-11-117-93-333B.indd 7 11/24/2014 2:51:42 PM
Loading ...
Loading ...
Loading ...