Loading ...
Loading ...
Loading ...
Components
Main Body x 1
WARNING: Heater must not be used without the castors fitted.
Wheels & Castors x 2
Assembly Instructions
ASSEMBLY FOR FREE STANDING
PLEASE NOTE: The screws supplied are one way
screws so once screwed in they cannot be
unscrewed again.
Each castor plate supplied with this heater
(supplied separately in the carton) requires 3
screws to attach them securely to the heater.
Holes are pre-drilled in the base of the heater.
The castor plates come with 3 pre-drilled holes.
1. Carefully turn the Main Body upside-down
on a scratch-free and stable surface. Be
careful to prevent damage to the cosmetic
finish or your floor surfacing.
2. Place the plastic lugs on the castor plate into
the holes on the bottom of the heater and
secure them in position with small screws
provided.
WARNING: Heater must not be used without the feet fitted.
This appliance has been supplied with ‘1 way screws’ for permanent installation of the
feet. This is a safety requirement for the New Zealand and Australian market.
Loading ...
Loading ...
Loading ...