Loading ...
Loading ...
Loading ...
Installation
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Remove Control BoxCover
Remove the cover to the Control Box by removing
the Phillips screw as shown and sliding the cover
down
Make Blower Electrical Connection
and Install Remote Blower
- Depending on the type of blower you purchased,
refer to its documentation for proper installation
instructions.
Control Box
- Phillips
Screw
Remote Blower Wire Connection
into wire compartment.
- Re-install the control box cover, do not pinch wires
- Push wires
when re=installing the cover.
Control
Blower Motor Ground (Green)
Wiring (Romex Line (Black)
or conduit) Neutral (White)
Line
Neutral "_:)
Ground
- Wire
Nuts (3)
Downdraft Vent Control Box Blower Wire Connection
Terminal
Block
Clamp
©
Romex Cable or
Wiring in
Metal Conduit
Line
(Black)
Ground
(Green/Bare) (White)
Specific to the El 16DDPRKS model
Loading ...
Loading ...
Loading ...