Loading ...
Loading ...
Loading ...
Nugget Ice Maker
GET YOUR ICE MAKER READY
6
Before First Use
6.Clean your ice maker and accessories. Add water to the reservoir, run self-cleaning program
twice with fresh water, and then drain it out through the drain hoses.
1.Unpack and check if all the items (Refer to page 3) are available. Please contact Gevi Customer
Service if anything is missing.
3.The incline angle should not exceed 45° when moving. Turning upside down is strictly
forbidden. Doing so can cause damage to the compressor or refrigerating system.
4.Keep the environment dry and stay away from heat sources such as ovens, heaters and
corrosive gases. Maintain at least 6 inches clearance on all sides of the ice maker for
ventilation.
2.Ensure the ice maker stands upright on the level surface. After the jolt of transport, keep the
ice maker still for 2 hours before plugging in.
5.The ice maker should operate between 50°F (10°C) and 90°F (32°C). Use water with a
temperature between 46°F (8°C) and 82°F (28°C) for ice making or cleaning. Exceeding the
limit may result in severe damage which is not covered by the warranty.
still for
2 hours
keep it
Loading ...
Loading ...
Loading ...