Loading ...
Loading ...
Loading ...
design.
Inspecting the connections and pipes
- Inspect the connections forleaks.
Leaks can normally be dealt with by tightening the connections properly.
If leaks from the intake pipeline connections are noticed, the seals must be
repaired.
- Inspect the hoses.
lf the pipes show signs of aging, breakage, swelling, rubbing, etc., they
must be replaced.
Inspecting the Filter
- Inspect the filter cartridge.
If the flter cartridge is fouled or damaged, refer to the filter manufacturer's
instructions for details on how to restore the filter cartridge to its original
filtering condition.
Checking the oil level
- Check the oil with the pump leveland cold.
- Check the amount of oil through the level gauge (A).
- If necessary, top up with oil with the characteristics specifed in
the "Lubricants table".
To top up with oil proceed as described below.
1) Unscrew the plug(B) and pour oil in until it is halfway up the level gauge
(A).
2) Screw on the plug (B).
Loading ...
Loading ...
Loading ...