Loading ...
Loading ...
Loading ...
Network Camera User Manual
68
5. Click Save.
9.14.3 Set MAC Address Filter
MAC address filter is a tool for access control. You can enable the MAC address filter to allow or
forbid the visits from the certain MAC addresses.
Steps
1. Go to Configuration → System → Security → MAC Address Filter.
2. Check Enable MAC Address Filter.
3. Select the type of MAC address filter.
Forbidden
MAC addresses in the list cannot access the device.
Allowed
Only MAC addresses in the list can access the device.
4. Edit the MAC address filter list.
Add
Add a new MAC address to the list.
Modify
Modify the selected MAC address in the list.
Delete
Delete the selected MAC address in the list.
5. Click Save.
9.14.4 Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS.
2. Check Enable to access the camera via HTTP or HTTPS protocol.
3. Check Enable HTTPS Browsing to access the camera only via HTTPS protocol.
4. Select the Server Certificate.
5. Click Save.
Note
If the function is abnormal, check if the selected certificate is abnormal in Certificate
Management.
9.14.5 Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by setting
Loading ...
Loading ...
Loading ...