Loading ...
Loading ...
Loading ...
aus first time
26
first time
10 Before using for the
first time
first time
10.1 Making settings for ini-
tial start-up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
HomeConnect app.
→"HomeConnect quick start",
Page37
Requirement:The appliance has
been installed and connected.
→Page12
1.
Add rinse aid. →Page26
2. Switch on the appliance.
→Page32
3. Set the amount of rinse aid to be
dispensed. →Page27
4.
Add detergent →Page27.
5. Start the Programme with the
highest cleaning temperature
→Page18 without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip:You can change this setting and
other Basic settings →Page35 at
any time again.
11 Rinse aid system
11.1 Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
1. Press the catch on the lid of the
dispenser for rinse aid
and lift
.
1
2
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
Loading ...
Loading ...
Loading ...