Loading ...
Loading ...
Loading ...
10
RS-485
System
This section introduces how to configure the date format, time format, and the NTP server.
On the main interface (Figure 3-1), select Local Setting > System.
System
Configure parameters.
Table 4-4 System parameter description
Parameter Description
Date Format You can select from Year-Month-Day, Month-Day-Year, and Day-Month-Year.
Time Format
Configure the time format, and you can select from 12-Hour or 24-Hour.
Time Zone Select a time zone as needed.
System Time
Configure the VTO system date, time and time zone.
Do not change the system time arbitrarily; it might cause problems on video
searching and publishing snapshot or notice. Before changing the system
time, turn off video recording or auto snapshot.
Sync PC Click to sync the VTO system time and the PC system time.
DST
Select ON to enable DST.
DST Type
Select Date to define a specific date for DST or select Week for it.
Start Time
Configure the begin time and end time for DST.
End Time
NTP Enable Select the check box to enable NTP timing.
Loading ...
Loading ...
Loading ...