Loading ...
Loading ...
Loading ...
Operating your Appliance
HEATER CONTROL SWITCHES
To turn the heater on, switch the top button to On (I)
position under ‘I’ for Low Heat or switch the bottom
button On under ‘II’ for Medium Heat. To obtain High
Heat both buttons must be switched to the On
position. For greater economy, use the High Heat
setting initially and then switch to the Low Heat
setting.
To turn Off, turn both buttons to the Off (O) position.
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach
the maximum position.
2. When the room reaches a temperature that is
comfortable for you, slowly turn the knob anti-
clockwise until the heater just turns off (you will
hear a click).
3. The heater will now cycle on and off to maintain
the comfort level you have set.
4. Take note of this setting position for future use.
Note: When the thermostat activates you may see a small flash of light (may look like a
spark) from inside the heater. This is normal and there is no cause for concern.
Loading ...
Loading ...
Loading ...