Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
IIIMII'IIIII I ......... ........ I1=1,1 II I IIIIIII '1 IH IIIIIIII1,11111111 HI
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
_ Depress clutch/brake pedal fully and set parking brake.
, Place motion contro! lever in neutra! (N) position.
- Place attachment ctutch in "DISENGAGED" position.
- Turn ignition key "OFF" and remove key.
• Make sure the b|ades and ail moving parts h_ve completely stopped.
• D_sconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
TRACTOR
TO REMOVE MOWER (See Fig. 19)
Mower wi{1be easier to remove from the right side of tractor,
. P!ace attachment clutch in "DISENGAGED" position,
- Move attachment Iiff Iever forward to lower mower to its
lowest position,
Rolt belt off engine pufley.
o Disconnect clutch rod from clutch lever by removing
retainer spring,
* Disconnect anti-sway bar from chassis bracket by
removing retainer spring.
, Disconnect suspension arms from rear deck brackets
by removing retainer springs.
o Disconnect front links from deck by removing retainer
springs.
o Raise lift lever to raise suspension arms. Slide mower
out from under tractor.
iMPORTANT: fF AN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED TO THE TRACTOR, THE
R,H. AND Loll. SUSPENSION ARMS MUST BE REMOVED
FROM TRACTOR.
TO iNSTALL MOWER (See Fig, !9)
, Raise attachment lift lever to its highest position,
= Slide mower under tractor with discharge guard to right
side of tractor.
- Lower lift lever to its lowest position,
= Install moWer in reverse order of removal instructions.
CLUTCH
SUSPENSION
/
RETAINER
SPRING
ANTI_-SWAY BAR
RETAINER
SPRINGS
('BOTH SIDES)
FIG. 19
2O
Loading ...
Loading ...
Loading ...