Ancona AN1545 User Manual and Installation Instructions

Loading ...

— 14 —

165

279

165

279

410

Installation

STEP 6

Preparations

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

• Determine and mark the center line on the ceiling or wall where the range hood will be installed.

• Make sure there is proper clearance within the ceiling or wall for exhaust vent.

• Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling or wall.

• Put a thick, protective covering over counter top, cooktop or range to protect from damage or dirt.

• Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE

STEP 7A (wall hoods only)

Installing the Hood Mounting Bracket

• Use a pencil to mark on the wall the desired placement of the range hood mounting screws.

• The range hood will be installed on top of this bracket. (See Figure #1-1, #1-2 or #1-3)

• Using references in Height and Clearance on Page 12, and Measurements and Diagrams on Page 8, 9 or 10, drill three

holes that will be used to x the lower mounting bracket.

STEP 8A (wall hoods only)

Installing the Upper Chimney Bracket

• Drilltwoholesaccordingtothesizeoftheuppermountingbracket.Theuppermountingbracketshouldbepositioned

ushwiththetopoftheoutsidechimney.(SeeFigure#1-1,#1-2or#1-3)

• Screw upper and hood mounting brackets in tightly.

Fig. #1-2

Flush to

the ceiling

• If performing wall installation, please follow Steps A

• If performing under cabinet installation, please follow Steps B

Fig. #1-1

Type I Type II

Fig. #1-3

Type III

Flush to

the ceiling

Flush to

the ceiling

Loading ...

Ancona AN1545 36 Inch Wall Mount Convertible Hood