Tripp Lite S3M50K-60KWR4T Owner's Manual

Loading ...

39

4.1.3 Bypass Mode

If the inverter is out of order, or if overload occurs, the static transfer switch will activate to transfer the load from

the inverter supply to bypass supply without interruption to the critical load. In the event the inverter output is not

synchronized with the bypass AC source, the static switch will perform a transfer of the load from the inverter to the

bypass with power interruption to the critical AC load. This is to avoid paralleling of unsynchronized AC sources. This

interruption is programmable but typically set to be less than an electrical cycle, e.g. less than 15 ms (50 Hz) or less than

13.33 ms (60 Hz).

SINGLE INPUT: Mains Input DUAL INPUT: Mains Input and Bypass Input

Figure 4-3: Bypass Mode

4.1.4 ECO Mode

When the UPS is at AC Mode and the requirement to the load is not critical, the UPS can be set at ECO mode in order

to increase the eciency of the power supplied. At ECO mode, the UPS works at Line-Interactive mode, so the UPS will

transfer to bypass supply. When the AC is out of set window, the UPS will transfer from bypass to Inverter and supplies

power from the battery, and then the LCD shows all related information on the screen. The UPS will default to ECO

Mode after powering up.

SINGLE INPUT: Mains Input DUAL INPUT: Mains Input and Bypass Input

Figure 4-4: ECO Mode

4. Operation

Bypass Mode

Maintenance Breaker

Bypass Input

Output

Maintenance Breaker

Static Bypass

Rectier

Battery Breaker

Inverter

Output Breaker Output Breaker

Bypass Breaker

Battery Input

Input Breaker

Static Bypass

Maintenance Bypass Breaker

AC Input

Mains Input

Bypass Input

Output

Static Bypass

Rectier

Battery Breaker

Inverter

Output Breaker

Bypass Breaker

Battery Input

Input Breaker

Output

AC Input

Loading ...

Tripp Lite S3M50K-60KWR4T 3-Phase 208V 50kVA UPS + 60kVA Input/Output Isolation Transformer Kit

Owner's Manual - Page 39