Makita XRH06ZB User Manual

Loading ...

7 ENGLISH

NOTE: Use a dry cloth to wipe the dirt off the lens of

the lamp. Be careful not to scratch the lens of lamp, or

it may lower the illumination.

Reversing switch action

►1. Reversing switch lever

CAUTION: Always check the direction of

rotation before operation.

CAUTION: Use the reversing switch only after

the tool comes to a complete stop. Changing the

direction of rotation before the tool stops may dam-

age the tool.

CAUTION: When not operating the tool,

always set the reversing switch lever to the neu-

tral position.

Thistoolhasareversingswitchtochangethedirection

of rotation. Depress the reversing switch lever from the

AsideforclockwiserotationorfromtheBsideforcoun-

terclockwise rotation.

When the reversing switch lever is in the neutral posi-

tion, the switch trigger cannot be pulled.

Selecting the action mode

NOTICE: Do not rotate the action mode chang-

ing knob when the tool is running.Thetoolwillbe

damaged.

NOTICE: To avoid rapid wear on the mode

change mechanism, be sure that the action mode

changing knob is always positively located in one

of the action mode positions.

Rotation with hammering

For drilling in concrete, masonry, etc., rotate the action

mode changing knob to the

symbol. Use a car-

bide-tipped drill bit.

►1.Actionmodechangingknob

Rotation only

For drilling in wood, metal or plastic materials, rotate

the action mode changing knob to the

symbol. Use a

twist drill bit or wood drill bit.

►1.Actionmodechangingknob

Electric brake

Thistoolisequippedwithanelectricbrake.Ifthetool

consistently fails to quickly stop after the switch trigger

is released, have the tool serviced at a Makita service

center.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Side grip (auxiliary handle)

CAUTION: Always use the side grip to ensure

safe operation.

CAUTION: After installing or adjusting the

side grip, make sure that the side grip is rmly

secured.

Installthesidegripsothatthegroovesonthegriptin

theprotrusionsonthetoolbarrel.Turnthegripclock-

wisetosecureit.Thegripcanbexedatdesiredangle.

Loading ...

Makita XRH06ZB 18V LXT Lithium‑Ion Sub‑Compact Brushless Cordless 11/16" Rotary Hammer, accepts SDS‑PLUS bits, Tool Only

User Manual - Page 7