Loading ...
Loading ...
Loading ...
Installation Steps:
Fig.1
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
NOTE: The fan weight is 18.7 lbs (8.5 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failing to do so can result in serious injury.
INSTALLATION INSTRUCTIONS
Tighten the hanger bracket to the outlet box with two mounting screws. (Make sure
the outlet box is securely installed so that it will be able to support at least the
fan weight.) Attach the safety cable hook to the ceiling and make sure the safety
cable hook is covered by the fan canopy.
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR
FAN SUPPORT"!
Fig.5.Fig.2
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Safety Cable Hook
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Collar
Hanger Pin
Fig.4
Motor Wires
Downrod
Downrod Stand
Cover
Canopy
Downrod
Collar
Canopy
Downrod Stand
Cover
Fig.5
Decorative Cap
Decorative Cap
Lock Pin
Hang the fan on hanger bracket, and
make sure the slot of hanger ball is
snapped into the chip of hanger
bracket exactly.
Note: For sloped ceiling installation,
make sure the slot of hanger ball and
the chip of hanger bracket face down.
Fig.6
Collar Screws
Fig.7
Slot
Chip
Hanger Bracket
IMPORTANT:
BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED IN THE SAFETY
INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
Remove the lock pin from the
hanger pin and remove the
hanger pin from the downrod.
Downrod
Thread the motor wires through the
downrod stand cover, decorative cap
(Making sure the smooth side of
decorative cap is facing downward.),
canopy and downrod.
Loosen the collar screws out part way.
Insert the downrod into the collar.
Slide hanger pin through holes of
collar and downrod.
Tighten the two collar screws.
Slide lock pin into hanger pin until
it is locked into position.
PAGE: 5 / 10
220428
Loading ...
Loading ...
Loading ...