Loading ...
Loading ...
Loading ...
EN - 18
MAINTENANCE SCHEDULE
Check Fasteners
IMPORTANT: Ensure all hardware is tight
before use.
Inspect Bagger Parts
Before each use, inspect bagger for holes,
abrasions, or structural damage. Replace any
worn or damaged parts.
Clean Unit
Clean bagger before and after each use.
Check Hex-Belt
Check hex-belt tension for wear after initial
first two hours of use and every 10 hours
thereafter. Replace if worn or deteriorated.
Replace Hex-Belt
1. Remove belt covers.
2. Disengage belt tensioner.
3. Remove belt from pulleys.
4. Remove old hex-belt.
5. Route new hex-belt on pulleys. See
Install Hex-Belt on page 14.
6. Engage belt tensioner.
7. Reinstall belt covers. See Install Belt
Covers on page 14.
NOTICE: The mesh bags can be washed
with low pressure water.
• Clean plastic surfaces with sponge and
mild detergent. Dry with a soft cloth.
• Remove debris from mesh bags before
storing.
• Store in a clean, dry area.
• Ensure fasteners are properly tightened.
• Inspect moving parts for damage and wear.
• Protect rusted or chipped painted surfaces.
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand entire
Safety section before
proceeding.
Service Performed
Each Use
Every 10 hrs.
Check Fasteners •
Inspect Bagger Parts •
Clean Unit •
Check Hex-Belt •*
STORAGE
WARNING: AVOID INJURY.
Read and understand entire
Safety section before
proceeding.
WARNING: NEVER spray unit
with high-pressure water. DO
NOT store unit outdoors.
Loading ...
Loading ...
Loading ...