Loading ...
Loading ...
2
TABLE OF CONTENTS
SECTION PAGE
PRODUCT SPECIFICATIONS .............................................................................................. 2
PROPOSITION 65 WARNING ...........................................................................................
2
SAFETY GUIDELINES - DEFINITIONS ................................................................................ 3
POWER TOOL SAFETY ........................................................................................................ 4
BELT / DISC SANDER SAFETY ............................................................................................ 5
ELECTRICAL REQUIREMENTS AND SAFETY .................................................................... 6
TOOLS NEEDED FOR ASSEMBLY ...................................................................................... 7
CARTON CONTENTS ........................................................................................................... 7
KNOW YOUR BELT / DISC SANDER.................................................................................... 9
ASSEMBLY AND ADJUSTMENTS......................................................................................... 10
OPERATION .......................................................................................................................... 14
MAINTENANCE ..................................................................................................................... 16
TROUBLESHOOTING GUIDE............................................................................................... 17
EXPLODED VIEW ................................................................................................................. 18
PARTS LIST ........................................................................................................................... 19
PRODUCT SPECIFICATIONS
MOTOR BELT
Amps .................. 5 AMP Speed ................. 2160 FPM (No load)
Voltage ............... 120 V Size .................... 4 in. wide x 36 in. long
Hz ....................... 60 (102 mm x 914 mm)
Horsepower ....... 3/4 HP DISC
Speed ................ 3450 RPM Speed ................ 3450 RPM
Type.................... Induction Size ................... 8 in. diameter (203 mm)
BELT WORKTABLE 6-11/16 in. x 4-15/16 in. DISC WORKTABLE 10-25/64 in. x 5-29/32 in.
(170 mm x 125 mm) (264 mm x 150 mm)
MITER GAUGE 0 ~ 60°
Right / Left DUST EXHAUST
PORT
2-1/2 in. O.D. (63.5 mm)
WARNING
!
electrical circuit for your tools. This sander is wired at the factory for 110-120 Volt operation. It must be con-
cord immediately if it is worn, cut or damaged in any way.
PROPOSITION 65 WARNING
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance
known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other
safeguards for personal protection. For more information go to: www. P65Warnings.ca.gov/wood
Some examples of these chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area and work with approved safety
Handling the power cord on this product may expose you to chemicals known to the state of California
to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more
information go to: www.P65Warnings.ca.gov
WARNING
!
Loading ...
Loading ...
Loading ...