Loading ...
Loading ...
Loading ...
AUTOMATIC ICEMAKER
(on icemaker-equipped models)
If your refrigerator
is used before water
is connected to the
icemaker, keep the
icemaker feeler arm in the
STOP (up) position.
When the refrigerator
has been connected
to the water supply
and the water has
been turned on,
position the freezer shelf
for icemaking,, Top hooks
on the multFposition shelf
should be in the 6th slot up
from the bottom of the
track; the 2-position shelf
should be in the lower
position. Then move the ice
storage bin into place
under the icemaker and
move the feeler arm to
the ON (down) position.
lcemaker
Ice Storage Bin
Feeler Arm
in STOP
Feeler Arm
in ON (down)
position
The ice cube mold will automatically fil! with water
after cooling to freezing temperatures, and first cubes
normally freeze after several hours° When cubes are
solidly frozen, they will be ejected from the mold into the
ice storage bin. Icemaking will continue until the feeler
arm senses that there are enough cubes in the bin and
stops icemaking. Be sure nothing interferes with the
swing of the feeler arm.
To keep the ice bin full, level the stored cubes with
your hand occasionally.
Once your icemaker is in operation, throw away the
first few batches of ice cubes. This wilt flush away
any impurities in the water line. Do the same thing
after vacations or long periods when ice isn't used°
Move feeler arm to STOP (up) position when:
• the home water supply is to be off for several hours,
• the ice storage bin is to be removed for a period
of time,
• going away on vacation. (Also turn off the valve in the
water supply line to the refrigerator.)
• turning the Fresh Food control to the OFF position°
If ice is not used often, old cubes will become
cloudy and taste stale, Empty the ice storage bin
periodically and wash it in lukewarm water,
if this is your first icemaker, you will hear sounds that
may be unfamiliar. They are normal ice-making sounds
and are not cause for concem.
ICE TRAYS (on models without automatic icemaker)
To release ice cubes,
turn the tray upside down,
hold it over a container,
and twist both ends_
For only one or two ice
cubes, leave the tray right-
side up, twist both ends
slightly, and remove as many
cubes as you want-
Wash ice trays in lukewarm water. A vinegar solution
will help remove mineral deposits. Do not put them in an
automatic dishwasher.
AUTOMATIC ICEMAKER ACCESSORY KIT
(optional at extra cost)
If your refrigerator did not come already equipped with
an automatic icemaker, you may add one--contact your
Sears Service Center.
17
Loading ...
Loading ...
Loading ...