Craftsman 706466390 tool cabinet

User Manual - Page 3

For 706466390.

PDF File Manual, 8 pages, Download pdf file

Loading ...
Loading ...
ItemsNeeded:
1/4-20x3/4"ButtonHeadScrew(Qty:1)
1/4-20SerratedFlangeNut(Qty:1)
MountingBracket(Qty:1)
o _ o
Q SHELF ADJUSTMENT
Empty shelf.
Remove fasteners.
Reattach shelf.
Process:
NOTE: Mounting bracket may be mounted on either side
of the cabinet. Mounting shown on left side.
Place Mounting Bracket in desired mounting location.
Mark center of mounting hole location, using slots in
bracket as a template.
Remove bracket. Drill 1/8" mounting hole.
- Mount to unit using (1) 1/4-20 x 3/4" Button Head
Screws, and (1) 1/4-20 Serrated Flange Nuts.
Finger tighten.
Nut
Mounting
Bracket
WARNING: Cabinet MUST be attached to a stud in a wood
frame wail. Failure to do so may cause personal injury or
product damage.
Wood frame wail, concrete or other surfaces require
hardware for mounting. Use appropriate hardware per your
local building codes. Failure to do so may cause personal
injury or product damage.
Atign cabinet with a stud. Adjust Leveter feet if needed.
Drill 1/8" pilot hole.
- Attach cabinet to stud using appropriate screw.
Screw
_,_ LEVELING FOOT ADJUSTMENT
Adjust Screw Leveler to desired position with Flathead
Screwdriver or 7/16" open end wrench as shown.
O DOOR CLOSURE
Ensuring the cabinet is level (front to back) will result in
the correct alignment of the doors and proper function of
the magnetic door closure system.
Loading ...
Loading ...
Loading ...