Loading ...
Power Button
Remove pcking tpe from coffee
mker. Plug into grounded outlet.
Plce mug on drip try.
Remove the water reservoir lid,
then lift the reservoir straight up
to remove it.
Rinse reservoir with fresh water
and fill to the MAX FILL line.
Replace water reservoir, making
sure the lock tabs engage with the
coffee maker. Replace lid.
NOTE: Do not use distilled water.
Lift and lower the handle. Do not
insert a K-Cup® pod. The coffee
maker will power on automatically.
The 3 cup sizes will blink. Press the 8oz
button, then press the blinking brew
button to start a cleansing brew. Pour
the hot water into the sink.
The one-time setup process is now
complete and you are ready to brew!
1
3
5
2
4
6
Before You Brew
Place a mug on the drip tray. If using
a travel mug, remove the drip tray
and place the mug on the drip tray
base. Lift the handle and place a
K-Cup® pod in the K-Cup® pod holder.
Lower the handle completely to close
the lid.
Do not remove the foil lid on the
K-Cup® pod.
The three brew size buttons will blink.
Select your brew size, then press the
blinking brew button. The brew button
will remain illuminated while brewing.
Brewing is complete when the buttons
are no longer illuminated. Lift the
handle and recycle the K-Cup® pod in
3 easy steps*.
CAUTION: While brewing, there is extremely hot water in
the K-Cup® pod holder. To avoid injury, do not lift the handle
during the brewing process.
STRONG
Brew Button
1
Brew Button
Plug & Place Rinse & Fill
Lift & Lower Cleansing Brew
Place Mug & Pod Brew & Enjoy!
Coffee Maker Features
Smart Start heats then brews in one simple process. No need to
wait for the coffee maker to heat before selecting brew size.
Simply power on your coffee maker by lifting the handle, insert
K-Cup® pod, then select your brew size. Press the brew button.
The coffee maker will heat, then automatically begin brewing.
Auto Off automatically turns your coffee maker off 5 minutes
after the last brew for energy savings.
High Altitude To ensure your coffee maker works properly at
higher altitudes (1,500 meters/5,000 feet) please enable the
High Altitude Brewing Mode on your coffee maker.
1. Power the coffee maker off while it is plugged in.
2. Press and hold the brew and 8oz buttons for 3 seconds.
The 12oz button will illuminate to confirm that the High
Altitude Brewing Mode has been enabled.
Brew Your First Cup
*Recyclable in select locations. Visit keurig.ca/recyclable for more information.
Loading ...
Loading ...
Loading ...