Loading ...
Loading ...
Loading ...
En-10
4. Reinstall the air lter.
Align the sides of the air lter with the panel, and push in fully,
making sure the 2 upper tabs are returned properly to their holes in
the panel.
Air lter
Panel
Air lter
Panel
5. Close the intake grille.
NOTES: If dirt accumulates on the air lter, airow will be reduced,
operating eciency will lower, and the noise will increase.
Cleaning Ion deodorization lter and
Replacing Apple-catechin lter
1. Remove the air lter. Refer to steps 1 ~ 2 of “Cleaning air
lter”.
2. Remove the air
cleaning lters from
the indoor unit.
Air cleaning lters
3. Flush the Ion deodorization lter (light blue) with high
pressure hot water until the surface of the lters are covered
with water.
4. Wash the Ion deodorization lter with diluent neutral
detergent.
Do not ream or rub, otherwise the deodorizing eect may decrease.
5. Rinse the Ion deodorization lter with water ow.
6. Dry the Ion deodorization lter in shade.
7. Remove the Apple-catechin lter (light green) from the
indoor unit.
8. Set the new or washed air cleaning lters into the indoor
unit.
Catch it on 5 places of picks.
(3 places of upper parts and lower part 2 places.)
Air cleaning lters
NOTES: Use the Apple-catechin lter as soon as possible after opening
the package. The air cleaning eect decreases when the lters
are left in the opened package.
9. Reinstall the air lter and close the intake grille. Refer to
steps 4 ~ 5 of “Cleaning air lter”.
Replacing Ion deodorization lter
1. Remove the air lters. Refer to steps 1 ~ 2 of “Cleaning air
lter”.
2. Remove the Ion deodorization lter (light blue) from the
indoor unit.
3. Install the new Ion deodorizing lter.
After extended non-use of the unit
If you have shut down the indoor unit for 1 month or more, perform the
Fan mode operation for half a day to dry the internal parts thoroughly
before the normal operation.
Additional inspection
After long period of use, accumulated dust inside the indoor unit may
reduce the performance even if you have maintained the unit properly.
In such a case, a product inspection is recommended.
For more information, consult authorized service personnel.
Filter indicator reset (Special setting)
This function can be used if set correctly during installation. Please
consult authorized service personnel in order to use this function.
)
Clean the air lter when the indicator lamp show the
following:
Indicator lamp Blinking pattern
Blinks 3 times, at intervals of 21 seconds
After cleaning, reset the lter indicator by pushing
on the
indoor unit for 2 seconds or less.
Loading ...
Loading ...
Loading ...