Loading ...
Loading ...
Loading ...
For Model
Width
Depth
24GC4B67A
23.23in
20.08in
24GC4L67A
25.39in
20.67in
30GC5B70C, 30GC5L70A
29.92in
20.08in
34GC5B90A, 34GC5B90C, 34GC5L90A
33.86in
19.69in
36GC5B90S, 36GC5L90I
35.43in
20.08in
Cut out dimensions
For Model
Width
Depth
24GC4B67A, 24GC4L67A
22.00 in
18.90in
30GC5B70C, 30GC5L70A
28.62in
18.77in
34GC5B90A, 34GC5B90C, 34GC5L90A,
36GC5L90I, 36GC5B90S
33.07in
18.90in
WARNING: If the cut out dimensions are too large beyond the support edge of the bottom shell, the
glass panel will contact with the cabinet desktop and suffer stress, which may lead to the risk of glass
breakage.
Technical Data
Burner configuration
NG
LPG
Nozzles Dia. (mm)
Btu/hr
Nozzles Dia. (mm)
Btu/hr
Wok burner
1.62
12000
1.06
12000
Rapid burner
1.5
10200
0.97
10200
Semi rapid burner
1.14
6000
0.75
6000
Auxiliary burner
0.83
3400
0.56
3400
Different models have different total heat input, please refer to page 3,page 4 & page 5.
Gas Type and working pressure:
NG gas pressure at 4.0 in w.c.
LPG gas pressure at 10 in w.c.
Important safety requirements
Location
The cooktops may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom,
shower room or garage. Before making the cut out in the worktop ensure that there is a minimum
distance of 2.17”(3.94”for 36GC5B90S) between the rear edge of the cooktops and the wall. A minimum
distance of 3.94” must be left between the side edges of the cooktops and any adjacent cabinets or
walls. The minimum distance combustible material can be fitted above the cooktops in line with the
edges of the cooktops is 18”. If it is fitted below 18” a space of 1.97” must be allowed from the edges of
the cooktops. The minimum distance combustible material can be fitted directly above the cooktops is
30”. Maximum depth for the overhead cabinets is 13”. The distance from the front edge of the cooktop
Loading ...
Loading ...
Loading ...