Loading ...
Loading ...
Loading ...
8
OPERATING INSTRUCTIONS
Operating Instructions
Getting Started
1. Load Dishwasher (See Dish
Preparation).
2. Add detergent (See Filling the
Detergent Dispenser).
3. Add Rinse Aid, if needed (See Rinse
Aid).
4. Select desired CYCLE (See Cycle
and Option Chart). The cycle
indicator light glows when selected.
5. Select desired OPTION (See Option
Selections).
Option Light glows
when selected.
6. Run hot water faucet nearest
dishwasher until water is at or near
120
0
for optimal performance (See
Water Temperature). Turn water o.
7. To start, press START/CANCEL pad.
8. Close door to latch.
Opening the door during cycle
If you open the door while a cycle is
running or delay is counting down, the
dishwasher will stop running.
NOTE
If the dishwasher door is opened while
the unit is running, the START/CANCEL
pad must be pressed and the door shut
immediately to return the unit to the
selected cycle and option, this must
happen within 10 minutes for the unit to
continue the cycle.
* Select the Normal Wash and High Temp options along with a Rinse Aid agent for
improved drying performance.
The LEDs of selected cycle and options
are illuminated, the status window
displays the remaining cycle time. The
LED above START pad will blink to press
start.
To resume, press START pad and close
the dishwasher door immediately.
The status window displays ‘Close’ after
the START pad is pressed.
A tone will sound indicating that the
dishwasher will begin running from the
point of interruption after the door is
closed.
If the dishwasher door is kept open for
too long, or the door is closed without
pressing START pad, the running cycle or
delay countdown will be canceled.
Child Lock Controls
To prevent children from accidentally
changing the dishwasher cycle or starting
the dishwasher, lock the dishwasher
controls by pressing and holding the Dry
pad for 3 seconds while the door is open.
An indicator light on the lock graphic pad
will illuminate when the controls are locked
and no new selections can be made until
the lock is released. To unlock the controls,
press the Dry pad, again for 3 seconds
until the indicator light goes out.
To Cancel a Cycle
You can cancel a cycle anytime during the
cycle. Press and hold the START/CANCEL
pad for 3 seconds. The light beside the
cycle and option selected will go out,
and the START/CANCEL light will remain
illuminated, the dishwasher will start a
90 second drain. At the end of the drain,
select the next desired cycle.
Loading ...
Loading ...
Loading ...