Please read this manual carefully before starting
to use the product and keep it for future reference
High Speed Hair Dryer
Scan the QR code for manuals
in multiple languages
1
Air Outlet
3 -Colors
Removable magnetic
air inlet screen
Red:Hot air
Orange:Warm air
Green:Cool air
Hot air
Warm air
Cool air
Off & Wind speed
Temperature
control button
gear button
Gear 2 High wind speed
Gear 1 Low wind speed
Off
LED indicator lights
2
Connect the mains cord to the mains socket .
Temperature control:Press temperature button to
adjust the temperatures.
During use,long press for 3 seconds to convert cold
and hot air.
Push up airflow speed button to gear 2.
Press and hold the Temperature button,meanwhile,
connect the mains cord to the mains socket.Self cleaning
is activated after approximately 3 seconds .
On/Airflow speed control:Push up airflow speed button
to gear 1 and gear 2 to use and adjust the wind speed.
After using, push down the wind speed gear button to
the bottom.
OPERATING
INSTRUCTIONS
SELF CLEANING
3
A. This product cannot be used in the bathroom or near
a water source.
C. Do not use near textiles or flammable and explosive
materials [gas] to avoid fire.
E. Do not use this appliance near waterfilled bathtubs,
bathing, tooth brushing basins or other utensils.
F. Do not block the air inlet and outlet during use.
H. Unplug the power plug after use to ensure safety.
J. Do not wipe the body with gasoline, thinner or corrosive
liquids.
K. Do not disassemble by yourself if there are abnormalities
or failures during use, and must be repaired by professionals
or professional repair points designated by the manufacturer.
I. This device is not suitable for people with slow
physical response or mental disorders , including
children , unless it can be used under the guidance or
help of persons responsible for safety.
G. Clean the air inlet regularly to ensure the smooth
flow of the inlet and outlet and prolong the service life
of the motor.
D. Do not use in a humid environment or in the bathroom
[It is recommended to install a residual current device
with a rated residual working current not exceeding
30mA in the electrical circuit of the bathroom power
supply "RCD" Do not use wet Touch or use with wet
hands,and do not use it near water sources. Not use
it near water sources.
B. Be sure to use power sockets that comply with safety
signs and compliance rates (recommended to use 10
amperes or more)
To ensure the safety of use and avoid causing injury
and property damage to you and others,please follow
the following safety precautions.Failure to follow the
safety warning may lead to accidents.
SAFETY PRECAUTION & SAFETY WARNING
4
Put the magnetic nozzle close to the air outlet, it can
be automatically absorbed and attached to the air outlet,
and the nozzle can be rotated 360 degrees for easy use.
Magnetic Concentrator Nozzle
360° rotation
Easy installation and removal
ACCESSORIES
Magnetic Concentrator Nozzle
5
Step 1
Unplug the power plug first.
Step 2
Hold the dryer handle, and pull down the magnetic air
inlet screen and remove it from the dryer handle.
Dryer handle
Magnetic air inlet screen
CLEANING AND
MAINTENANCE
6
Step 3
Use a fine-bristle brush to remove dust from the stainless
steel filter, and do not wash with water.
Stainless steel filter
Step 4
After cleaning, align the magnetic air inlet screen with
the corresponding slot on the dryer handle and insert
it. A click sound indicates that the magnetic air inlet
screen is assembled in place.
7
Product model:CFJ05RM/CFJ05RMW
Product size: 276 x 71 x 90mm
Rated voltage: 220-240V~
Rated frequency: 50/60Hz
Power: 1600W
Wind speed gear: 2 gears
Temperature control gear: 3 temperatures
This product is guaranteed for a period of 24 months
(defined by local law)from the date of purchase against any
failure resulting from manufacturing or material defects.
This warranty does not cover damage caused by improper
installation,improper use, or normal wear and tear of the
product.More specifically,the warranty does not cover:
Damage or problems caused by improper use,accident,
alteration or electrical connection of improper intensity
or voltage.
Modified products,those whose warranty sel or serial
number have been damaged,altered,removed or oxidized.
PRODUCT
SPECIFICATION
PERFORMANCE
Warranty Description
TEMPERATURE
Hot Air
80℃/176℉
50℃/122℉
Room temperature
Warm Air
Cold Air
HUMIDITY
25% RH
30% RH
-
8
Failure of the battery due to overcharging or failure to
observe the safety instructions explained in the instruction
manual.
Cosmetic damage,including scratches,dents,or any other
element .
Damage caused by any intervention carried out by an
unauthorised person.
Defects caused by normal wear and tear or due to normal
ageing of the product .
Software updates due to a change in network setting.
Product failures due to the use of third party software to
modify ,change or adapt the existing software.
Product failures caused by use without accessories
approved by the manufacturer.
Oxidised products .
Manufacturer:ROIDMI Information Technology Co., Ltd.
Address: 4F,C8 BUILDING,NO.1699 HUISHAN ROAD,
LIFE SCIENCE AND TECHNOLOGY PARK,HUISHAN
DISTRICT,WUXI,JIANGSU,PRC
Executive Standard: EN 50564:2011
EN 60335-2-23:2003/A2:2015 EN 62233:2008
EN60335-1:2012/A15:2021 EN IEC 55014-1:2021
EN IEC 55014-2:2021 2011/65/EU
EN IEC 6100-3-2:2019/A1:2021 EN6100-3-3:2013/A2:2021
Service Email : [email protected]
Enterprise Website: www.roidmi.com/en
No.08.2023
Made in China
