Ancona AN1294 User Manual

Loading ...

— 11 —

Installation

STEP 7

Preparations

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

• Determine and mark the centre line on the ceiling or wall where the range hood will be installed.

• Make sure there is proper clearance within the ceiling or wall for exhaust vent.

• Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling or wall.

• Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt.

• Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE

• Remove the 2 lters to allow access to the inside of the unit. (See Fig #1)

STEP 6

Create Exterior Ventilation (New Installation Only)

• Choose one of the exterior venting methods shown on Page 10.

• Create the exterior ventilation hole.

• Insert exterior damper into exterior ventilation hole.

• Following recommendations and calculations specied on Pages 8 to 10, use new aluminum/metal ducting cut

specically for the distance between the range hood damper and the exterior damper.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape.

• Please check the building codes in your city to learn which tape product is recommended.

• If performing new installation, please follow Step 6

• If performing replacement installation, please skip Step 6 and

continue to Step 7

Fig #1

Loading ...

Ancona AN1294 30 Inch Stainless Steel Ducted Standard Hood Under Cabinet Hood