Loading ...
Loading ...
Loading ...
CONTROL PANEL AND FEATURES
Small/ Medium/ FCr o_lh/e Warm/
Petite Moyenne Ti&de
,_,_ Cold/ _ Hot/
Load Size/ Wash Temp/
Taille de brassie Temperature de lavage
s_ms 3oo
s_l_s 3oo
Normal
R°g_la_g°l_°_Casual/
sop Tout.aller
Regular/R_gulier Dellcates/
Heavy Duty/ Dehcats
Se,,,ioei._e.,oruff 11 II _ _ _, w, /
Super
_. p./ ...................._._s_./ °_'_=7.'_%_&_.....
START
0
Not all features and options are available on all models.
Appearance may vary.
LOAD SiZE
Select the setting most suitable for your load. Extra Small will
add a low amount of water for smaller loads and Large will
add the most amount of water for large or bulky loads. Items
need to move freely. Tightly packing the load can lead to
poor cleaning performance, and may increase wrinkling and
tangling.
O
CYCLE STATUS LIGHTS iNDICATOR
S_NSING/ WASH/ _INS_/ SPIN/ COMFtETE/ LOCKED/
CD CED CED CE) CD CE)
The Cycle Status Lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that
are different from traditional washers.
O
WASH TEMP
Wash Temp senses and maintains uniform water temperatures
by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric and
soils being washed. For best results and following the garment
label instructions, use the warmest wash water safe for your
fabric.
" On some models and cycles, warm and hot water may be
cooler than your previous washer.
* Even in a cold and cool water wash, some warm
water may be added to the washer to maintain
a minimum temperature. All rinses are cold.
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
See "Cycle Guide" for detailed descriptions of cycles.
START/PAUSE/Unlock Lid button
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: if the washer is spinning, it may take several minutes to
unlock the lid. Press and hold for 3 seconds to cancel a cycle.
SENSING
When the START/PAUSE/Unlock Lid button is pressed,
the washer will fiJJ to the selected water level, if the lid is
closed when the machine is done filling the JJd wJJJ Jack
and the machine will begin operation.
If the lid is open when the water stops entering the
machine, the cycle will not begin until the Hd has been
closed and the START/PAUSE/Unlock Lid button is pressed.
If the cycle has not been started within 10 minutes of the
water filling the washer, the washer wJJJpump out the
water.
NOTE: Avoid opening lid during sensing phase. The sensing
process will start over when the washer is restarted. The
sensing light may also come on during the Soak and Wash
portions of the cycle. This is normal. To restart the washer
after the lid has been opened press start.
WASH
You will hear the agitator moving the load. The motor
sounds may change at different stages in the cycle. The
wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear the motor
turning on briefly (short hum) to move the basket while
filling.
Some cycles use spray rinsing. After draining and spinning
out wash water, the washer will continue to spin and spray
in rinse water for the entire rinse time.
4
Loading ...
Loading ...
Loading ...