Loading ...
Loading ...
Loading ...
20
PROTECTING YOUR DISHWASHER FOR LONG PERIODS
TROUBLESHOOTING
To restore service:
1 Reconnect the water, drain, and electrical power.
2 Turn on water and electrical power supply.
3 Fill the detergent cup and the rinse aid cup and run the dishwasher through a
heated-wash cycle.
4 Check all connections to make sure they do not leak.
Refer to this table to correct minor issues before calling for service
Caution
• If an overflow occurs, turn o the main water supply before calling for service.
• If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
Longer inlet time • Faucet is not opened
• Water intake is restricted
• Water pressure is too low
Overflow A leak in the dishwasher
The wire is not connected correctly,
or the distributary valve is broken.
Anything (including water)
touching a button.
The orientation of the distributary
valve not working.
A button has been touched for more than
30 seconds (by anything, including water).
Loading ...
Loading ...
Loading ...