Air Innovations 505-BLUE Assembly Instructions

Loading ...

Filling The Water Tank

CAUTION: Always unplug the unit before removing the Water Tank.

Do not touch the water in the base.

Grab the Water Tank with both

hands and lift it up to remove from

the Humidier Base.

Turn the Water Tank upside down

and remove the Tank Cap by

turning it counterclockwise.

Fill the Water Tank with clean, cool,

tap water.

Do not use extremely

cold water, since it may temporar-

ily reduce the mist output. Never

ll with hot/warm water or add

additives as this could damage

the unit and void the warranty.

Replace the Tank Cap by rmly

turning clockwise until tight. Turn

the Water Tank upright and check

the Tank Cap for leaks. If any water

drips, remove the Tank Cap and

retighten. Do not place Water

Tank on the Humidier Base if the

cap is leaking.

Grab the Water Tank with both

hands and replace on the Humidi-

er Base, make sure to follow the

shape of the Water Tank and the

Humidier Base (as shown above),

so that the tank seats leveled and

ush to the base. Ensure the tank is

rmly seated.

Attach Filter (included) to the Tank

Cap by aligning the lock tabs on both

and turning the cap counterclockwise

to lock. When attached properly the

Filter will not fall from the Tank Cap.

Loading ...

Air Innovations 505-BLUE Ultrasonic Digital Humidifier 1.37 Gallon