Loading ...
Loading ...
Loading ...
7. Plug the power cord into a standard 120-volt AC electrical outlet.
8. Press the switch button; the indicator light will illuminate, confirming that the coffeemaker is operating.
Caution: Do not open the reservoir lid during the brew cycle, as scalding may occur.
To prolong the product life, please operate it properly:
9. Allow all the coffee to drip from the brewing chamber into the mug before removing the mug.
Note: since coffee grounds absorb some water during brewing, the amount of brewed coffee will be slightly less
than the amount of water pure poured in the reservoir.
10. When the brewing cycle is complete, the indicator light will shut off and the unit will not longer heat.
11. If you need to brew another mug of coffee at this time, proceed to the brewing a second mug of coffee section.
When all brewing is complete, unplug the power cord from the electrical outlet.
12. Note：once the start button is pressed, the coffeemaker will start the brewing cycle and remain on until the brewing
cycle is complete, to interrupt or stop the brewing cycle, you must disconnect the plug from the electrical outlet.
Brewing a Second Mug of Coffee:
To brew another mug of coffee, allow the coffeemaker to completely cool (about three minutes) after the
Indicator Light has shut off. Rinse the mug and the Reusable Mesh Filter with water. Repeat the brewing
procedure.
WARNING: If the Coffeemaker does not cool completely before reuse, water placed in the Water Reservoir
may overheat. This can cause steam to escape, resulting in a risk of burns and/or personal injury.
NOTICE: Attempting to start another brewing cycle before the Coffeemaker cools may result in an incomplete
cycle; the unit employs a thermal reset switch to prevent overheating and may shut down.
Loading ...
Loading ...
Loading ...