Loading ...
Loading ...
Loading ...
HCE710A, HME710A 23
Fig. 26
25. Install main housing insulation and shuttle insulation:
Fig. 27
26. Apply a coat of petrol-gel to auger shaft.
2 7. Slide gear motor onto auger and install gear motor
bolts (1/2" wrench).
APPLY
PETROL-GEL
Fig. 28
28. Use screwdriver to pry auger shaft foward, then
orient auger shaft to align with motor shaft keyway
(Fig. 28.1).
29. Install key fully into keyway (Fig. 28.2).
1
2
3
Fig. 29
30. Install spacer, ensure that key is captured in slot.
Loading ...
Loading ...
Loading ...