Loading ...
Loading ...
Loading ...
Troubleshooting en
39
Fault Cause and troubleshooting
The door cannot
beopened.
––– is activated.
▶ Continue the programme by selecting Spin or
Drain and pressing Start / Reload .
→"Resuming the programme when the programme
status is Rinse Hold", Page29
The temperature is too high.
▶ Wait until the temperature has dropped.
▶ Cancel the programme.
→"Cancelling the programme", Page29
Water level is too high.
▶ Select a suitable programme for draining.
→"Programmes", Page23
Power failure.
▶ Open the door using the emergency release.
→"Emergency release", Page45
The water is not drain-
ing.
Drain pipe or water outlet hose is blocked.
▶ Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
▶ Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked.
▶
→"Cleaning the drain pump", Page33
––– is activated.
▶ Continue the programme by selecting Spin or
Drain and pressing Start / Reload .
→"Resuming the programme when the programme
status is Rinse Hold", Page29
The water outlet hose is connected too high.
▶ Install the water outlet hose at a maximum height of
1 metre.
Pump cover is not correctly assembled.
▶ Correctly assemble the pump cover.
Detergent dosage is too high.
▶ Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mix-
ture into the left-hand compartment (not for outdoor
clothing, sportswear or items stuffed with down).
▶ Reduce the amount of detergent for the next wash-
ing cycle with the same load.
Loading ...
Loading ...
Loading ...