Loading ...
Loading ...
Loading ...
23OPERATION
ENGLISH
Once the desired cycle has been selected, the standard presets will appear in the display.
NOTE
To protect your clothing, not all settings are available on all cycle selections.
c Time and Status Display
The display shows the settings, estimated time remaining, options, and status messages for the
washer.
d Start/Pause Button
Press and hold this button to start the selected cycle.
If the washer is running, use this button to pause the cycle without losing the current settings.
NOTE
If the Start/Pause button is not pressed to start the selected cycle, after a delay the washer
automatically turns off and all cycle settings are lost.
e Option Buttons
These buttons allow you to select additional cycle options. Certain buttons also allow you to activate
special functions by pressing and holding the button for 3 seconds.
Time and Status Display
a Control Lock Indicator
This indicator lights up when the control panel is locked.
[L and the remaining wash time are displayed, in turn, on the time remaining display.
When this function is set, all controls are disabled except for the Power button.
b Drawer Lock Indicator
This indicator lights up when the cycle starts and the drawer is locked.
The indicator light stays on until the cycle is paused, stopped or has finished.
c Estimated Time Remaining
When a cycle is selected, the default time for that cycle is displayed. This time will change as options
are selected.
If the display shows ---, then the time will be displayed after the load sensing has detected the load
size.
The time shown is only an estimate. This time is based on normal operating conditions. Several
external factors (load size, room temperature, incoming water temperature, etc.) can affect the actual
time.
d Cycle Status Indicators
These LEDs will light when a cycle is selected to indicate which stages will run. 1 LED for washing, 2
LEDs for rinsing and 3 LEDs for spinning.
If the washer is running normally, the LED moves back and forth.
Loading ...
Loading ...
Loading ...